Search:

Thanks for all the help again. I found the short. It was at the taillights where the taillight wiring splits and goes to each side. The blue wire which is Hot and the Black wire were bald and...

I do have the hand primer added and it's a great add on for $11. The headlight switch was on and as soon as turned those off it fired right. The wires don't get hot unless the headlights are on so...

I have done the ground upgrades. Also I put the Black and the black/blue wire on a momentary/push button. Put the other 2wires on a toggle switch. Now it will crank but won't start. And the 2 wires...

Ok Steve it's doing the same thing again. Blowing the 30amp fuse. I took the new ignition switch out and pulled it apart and it's melted inside. So that means I have to many amps going to that switch...

Well here goes. Got the new ignition just now in the mail. Installed it and the light would just barley shine, so I put 30amp fuse in and she fired right up. I still have no tail/break lights. Guess...

Could you please explain how to do that. Also I went ahead and upgraded the grounding as Kenny G advised in the first reply. I did a ground from the engine case to the frame then also did the pigtail...

I ran the Br/L wire from fuse box all the way through until it stopped at the ignition switch. No bad wires. So now where do you think I should look?

I will get back with it on Saturday and let you know. Thanks

That is correct. Also when I unplug that pigtail wire from the ground the light is still on. Thanks I love the light ideal by the way. Cheaper than all those fuses I have been buying.

Ok so I hooked up the light switch off light off. Turned switch on light on. Pulled all small fuses in the fuse no change in light. Unplugged the butt connector at the ground light still on. Where do...

Thanks for all the great info. I'm working today but will get all the supplies you mentioned and start tomorrow night. Looks like this will take me a little but I will let you know what I find.

2004 Rhino 660 keeps blowing the starter solinoid fuse. I removed the ignition switch and found it to be fried. Put an automotive ignition on and it does the same thing. As soon as I turn the key to...