Just installed my Alba Racing bumper on my 2014 RZR 800 S !!!
First let me say, when I picked up the box, I thought there is no way there is a bumper in here. It weighs nothing !!
Fit and finish was amazing and only took about 20 min to install. I have the UHMW skid plates so I took the front section down and put the bumper mount against the frame then put the skid over that. Made for a very smooth transition.
I do have a winch so I was not going to be able to use the center plate, but after looking at it for a while, I came up with the idea of cutting plate in half and bending the bottom 2 in's under. Turned out great ! With the turned edge at the bottom, it makes for a smooth edge if the synthetic rope gets against it while winching.
Attachment 470
Attachment 471
|
Sponsored By: |
 |
Thanks: 1
Likes: 0
Dislikes: 0
Results 1 to 10 of 13
Thread: Alba Racing RZR Bumper !
-
12-24-2013, 08:28 PM #1Super Moderator
- Join Date
- Dec 2013
- Posts
- 225
Alba Racing RZR Bumper !
Last edited by Firefighter; 12-24-2013 at 08:31 PM.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
WV Hot Rod Rhino thanked for this post
-
12-24-2013, 08:31 PM #2
- Join Date
- Dec 2013
- Location
- Kenova W.V
- Posts
- 2,784
Couldn't get the pics to pull up.
JBS 787, bored throttle body , +1ported head, JBS deshrowded valves,kibble white valve springs, muzzy exshaust,dynatek coil,TCP oil cooler, triple pass radiator,billit one steering rack,heavy duty steering tierods, heim joints,+6 long travel,tilt wheel, radius roll cage, JBS rear splash shield
Bead lock wheels , bear claw tires , power steering
-
12-24-2013, 08:42 PM #3Super Moderator
- Join Date
- Dec 2013
- Posts
- 225
-
12-24-2013, 08:43 PM #4Super Moderator
- Join Date
- Dec 2013
- Posts
- 225
Thanks T. Dont know what happened.....
Originally Posted by T.Rhino
-
12-25-2013, 09:17 AM #5Administrator
- Join Date
- Dec 2013
- Location
- Mount Hope, West Virginia, United States
- Posts
- 8,709
nice!!!
-
12-25-2013, 11:26 AM #6
- Join Date
- Dec 2013
- Location
- Fullerton California
- Posts
- 37
Very nice
Sent from my iPhone using Tapatalk2007 Silver 660 Sport
Dynatek CDI, Jetted, High Volume Fuel Pump, Custom 4 seat cage, PRP Seats, Crow Harnesses, HID's, Bighorns, Gauges, Big Gun Pipe, Trailbright 40" LED light bar, JBS Sheave, Orange Spring, 15 oz OD's and a bunch of other crap!
-
12-25-2013, 11:27 AM #7
- Join Date
- Dec 2013
- Location
- Kenova W.V
- Posts
- 2,784
Nice looking.
Sent from the drivers seat of my truck.
JBS 787, bored throttle body , +1ported head, JBS deshrowded valves,kibble white valve springs, muzzy exshaust,dynatek coil,TCP oil cooler, triple pass radiator,billit one steering rack,heavy duty steering tierods, heim joints,+6 long travel,tilt wheel, radius roll cage, JBS rear splash shield
Bead lock wheels , bear claw tires , power steering
-
12-25-2013, 11:45 AM #8TOXIC TERYX
- Join Date
- Dec 2013
- Location
- WOODS CROSS UTAH
- Posts
- 5,364
Looks mean!
Sent from Teddy's iPhone2015 Teryx 4 LE 800, EMP full glass windshield,JBS floor guards, Street legal kit. Highlifter 2" lift, Super ATV arched A-arms, M20 wheels, 28" ITP Bajacross tires. Bandit shocks, Throttle Maxx throttle pedal extension Rock lights, Terra45 winch, JBS Radiator guards, custom JBS hood decal and tunes!!
-
12-25-2013, 12:03 PM #9
- Join Date
- Dec 2013
- Location
- Cowboy State, Wyoming
- Posts
- 3,391
Like what you're doing to that new bike Larry.
06/450: Rhino; JBS Hot Rod Sheave/12gr OD's; Blue Spring; 04 Style/KN Air; Dyna CDI; Axia Exhaust Tip; 3" Lift; Sport Shocks; 27X14 Mudlite XTR's; Warn 2500#
08/700: Rhino; JBS Hot Rod X-Sheave/16gr OD's/Slugged; Purple Spring; Alba TB; Raptor HotCam; MSD/JBS-Map; Yoshimura Duals; Pro One Doors; LSR MTS; LSR Front & Back Supports; Ricochet Skids; Elka 4's; RackZilla/PS: 26X12 Pitbull Growlers; Camoplast T4S; Viper 4500#; Trail Bright LEDs.
Let'em Buck!!!
-
12-25-2013, 02:12 PM #10
- Join Date
- Dec 2013
- Location
- Arkansas
- Posts
- 167
Badass Larry looks awesome with winch!
Sent from my SAMSUNG-SGH-I337 using Tapatalk2014 XP1K Black pearl, with 2015 clutch cover and intake upgrades, Pro Armor doors, FUTV skids, Extreme bumpers front and rear, Rock sliders, Aluminum roof, 30" LED bar,12" LED bar,6" LED bar, PRP suspension heated seats , Pro Armor harnesses, Full MTX stereo with 10" sub, No Limit Vector 15" wheels w/ 31.10.5x15 Courser MXT tires, Full HMF black dual exhaust w/ Dobeck AFR and programmer, Dirty Dawg clutch kit, Warn 3500# winch, and Highlifter Outlaw DHT axles, 7" Samsung Tablet.
Reply With Quote
Bookmarks