-
Kawi tip
I removed the center console/"hump" so I could run power to my sound bar . Since I discovered a loose clamp on the clutch tube underneath while putting on James' skids ; I figured I should check the others . EVERY clamp , even the on the air box , were not much more than finger tight !!! I'm sure they were prob torqued to "spec" ; but , IMO if you can turn the socket with your fingers (without even having the ratchet on) it isn't tight enough !!
08 700 ...
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Dislikes
-
Ridin' and Guidin'
I go over every new machine I get and check for loose bolts, etc. My rzr cvt cover screws were barely hand tight. Some of the clamps on the cvt on the wolverine were installed wrong. Good idea to check whatever brand for those things. Good that you found those now.
" White Shadow " Wolverine X2
JBS Performance Extreme Sheave
JBS Performance Suspension Springs
Team Alba Racing ECU
Rigid Side Shooter Led
Yamaha Cab Enclosure
Bazooka Party Bar
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Dislikes
-
I bought my Teryx4 brand new, brought it home and putted around the yard a few hours, then found a puddle of coolant under it the next morning. Hose clamps on radiator hose were finger tight.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
Bookmarks