-
When i put my bandits on my teryx. I set the ride height then set the compression adjuster 1 click from all the way soft. Then adjusted them up 1 click at a time till i Iiked the ride and they didn't bottom out on harsh bumps. Just my .02
Sent from my SM-N950U using Tapatalk
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 Dislikes
-
JBS 734 with Crank Works crank and rod - CP 11:1 BBK- Hotcams stage 3 Raptor cam - JBS ported head - JBS Hot Rod sheave with 16s - Gold secondary - 26x9 OG Bighorns on Racline wheels - BRP cdi - Bazzaz Z FI - Yoshimura exhaust - Hump's led headlight swap with Trailbrightled lights - 10" Rigid SR light bar - 4" cage chop with home made custom bracing - home built doors - Mishimoto radiator
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
-
Moderator
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Lookin good bro ! Is that portal seeping at the seam...do they all do that ?
08 700 ...
-
Moderator
Originally Posted by
scottwv
Lookin good bro ! Is that portal seeping at the seam...do they all do that ?
Just oil mess from when I had that cover off last week but a lot of the paper gasket do seep. They have changed to rubber but I only replace them as needed.
Sent from my SAMSUNG-SM-G891A using Tapatalk
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Moderator
Omg. My suspension moves! Lol
Sent from my SAMSUNG-SM-G891A using Tapatalk
-
Post Thanks / Like - 0 Thanks, 4 Likes, 0 Dislikes
-
Moderator
Also found a really bad video of why I love my JBS clutch!
https://youtu.be/12pj-LI8P_k
Sent from my SAMSUNG-SM-G891A using Tapatalk
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Moderator
Roof is on. Just have to do a lil trimming and send the cage for powder.
Sent from my SAMSUNG-SM-G891A using Tapatalk
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 Dislikes
-
Lookin good. I just got one thing...I don't know if you want that much over hang on the driver side, but it will have a real bad day if it gets in a fight with a tree limb. Maybe you were gonna trim it and I opened my mouth to soon. Either way, just a little "been there done that" for you.
JBS 734 with Crank Works crank and rod - CP 11:1 BBK- Hotcams stage 3 Raptor cam - JBS ported head - JBS Hot Rod sheave with 16s - Gold secondary - 26x9 OG Bighorns on Racline wheels - BRP cdi - Bazzaz Z FI - Yoshimura exhaust - Hump's led headlight swap with Trailbrightled lights - 10" Rigid SR light bar - 4" cage chop with home made custom bracing - home built doors - Mishimoto radiator
-
Moderator
Not cut yet
Sent from my SM-G965U using Tapatalk
Bookmarks