I wanted to get Baxter's bad azz build thread over here ....
All info has been copied directly from http://hotrodrhinoforums.forumotion....urrected-rhino
http://hotrodforums.net/forums/image...013/12/257.jpg
This will be a long and drawn out project but I thought I post some pics before I start cuttin it up.This is my personal Rhino.it's an 08 with LS MTS 27.5 Pittbulls and Hiper beadlocks.As stated before it getting boat sided which means I'm taking the rocker tube up 6" from the frame out.Bed delete and crab cut of the bed sides.6" drop in the seats and Fuel cell relocation with some carbon fiber work at the end.Oh I set the factory cage back on it for a good before and afterwards pic.My next job won't be here till Fri so I'll start on it in the morning.The next pic is of it sitting in front of a stock rhino on worn out 27" Mud Lights.
http://hotrodforums.net/forums/image...013/12/258.jpg
http://hotrodforums.net/forums/image...013/12/259.jpg
Pics a crap I know.I'm not real far on it but I'm fixing the frame wear I puckered it last year.i fit a 3' deep wash out at about 40.I thought I broke both wrists I his so hard.It was pushed in on the lower front A arm back tabs.It's plated with 3/16 now.
http://hotrodforums.net/forums/image...013/12/260.jpg