A little to deep to cross this spot
10526
Type: Posts; User: CaptainInsaino
A little to deep to cross this spot
10526
Thanks to everyone for the help. Found out the wire broke inside the jacket at the air intake sensor so it looked good but was not. This caused the check engine light code 13 and also caused the...
After thinking about it a while I remember the Reverse light coming on a couple times even when I was in high gear but did go back out after a couple of seconds of shifting back and forth. Thought...
Thanks to everyone for the advice. As soon as I get a chance to do some more tests I will let everyone know.
I used the side cover from what I believe is a Rhino because it has longer and different connectors for the stator on a Rhino which is bundled in with the crank sensor.
Sorry I forgot to mention all the details but I did not want to make it to long where no one would read. Maybe only 40 miles on belt. Wet clutch is new. Primary is new. New Gold spring and...
But why would the RPM's not go any higher than 6400. If I smash the throttle from the start it will start bouncing at 25 all the way up to 42. I can reach that RPM with only 65% throttle so there...
9691
I don't think that is it. I tried my friends MSD that does 60 and had the same result, 42MPH at 65% throttle with a lot of petal left yet. So I then hooked my original MSD and my friends...
Maybe someone can help me. I Just rebuilt my 700 into a 734 and added MSD. When I rebuilt it I used a crank case off a Grizzly because it was cheap and then put the gears out of a Rhino in it. For...
Any preference on the brand of stator (OEM vs RM or Ricks). James or someone im sure can answer this?
It works good. More of a dummy light. When it gets good and up to temp at idle it reads 0 but as soon as any throttle is applied it jumps up. For 15 or 20 off amazon it is worth it to me. My last...
Here is what I did. Made faceplate from some scrap. $10 aluminum sheet from menards for backbox. Cut, bent, and put rivets to hold in place. Corner screws of faceplate also go into backbox tabs. ...
Jim, what did james point out early. I must have missed it. Do you know which bushings your friend started off with or where they completely from scratch? Im just a poor man who spent 2k in a...
I called and talked to them but Bob was busy. the other guy i talked to sent me some prices and its pretty steep. $75 an eyelet plus i have to ship them to them. They will not send out the kit...
James do you sell just the sport resi shock bushing for now or does anyone else know where to get a new one. Mine are getting wore and I don't have the funds for a full rebuild. Also what is the...
Would you have a tune for a 734, cp 11:1 piston, Rhino stage 2 (also know as grizzly mudbuster), MSD3d, purple spring, 16g,. Stock exhaust for a couple months to replenish funds and order my clutch...
Have you tried them? I used a Niche and it lasted 3 hours on stock suspension and normal riding. Good news is I emailed them and they just sent me another one at no charge and told me to keep the...
I Bought a 734 kit from alba racing for $450 and it comes with a CP piston which have a pretty good review. Also use the discount code RAPTOR for the discount.
does it have a bung for a/f sensor
I need new exhaust and was wondering the best bang for the buck. I don't mind a little noise but i do have the wife or kids ride with me sometimes so i don't need super loud. I know it is a catch...
I bought a 700 grizzly for the case but found my rod was bad as well on mine so would like to try and use that as well. Problem is that i found 15 of these in the bottom of the case when i split it...
I was wondering the same thing
8605
Crossing fingers....
2007 700
http://hotrodforums.net/forums/attachment.php?attachmentid=8604&d=1457709161
Crossing fingers....
2007 700
Putting a 734 kit in my 2009 rhino 700. If my calculations are correct is everyone running about .018 top and .020 bottom. What about the oil ring? Do you file compress or leave it alone. I have...