How many miles do you typically see out of a built motor James? I have about 1200 miles on the 804. Very good luck except for water pump. Have you sold any more of those kits besides to me and ...
Type: Posts; User: DuckHunter
How many miles do you typically see out of a built motor James? I have about 1200 miles on the 804. Very good luck except for water pump. Have you sold any more of those kits besides to me and ...
Love to see people still building the Rhino !!
I love mine so agile and small enough to fit about any place !!
With a decent motor build in good suspension they are hard to beat !!
I Have never had a over heat issue either but it did run at 207 a lot.
I did notice the last 100 miles it has not run up there nearly that much and when it did it cooled down a lot quicker. I have...
Still alive Snowrider lol
Radiator seems to help but only been on one ride with it .
I had the coolent system apart for water pump so I figured I would give it a try.
Did you get your issues...
Hi all ,I Haven’t been on for a while !!
Just a quick question, wonder what is out there for thermostats for the rhino??
Just ended up putting the larger radiator on and wonder if they had a...
Does anyone know how much slack should be on the oil pump chain of the top of there head?
I'm sure it's fine but looks a little loose?
When I put in the stroker I did replace chain and pump . I'm...
How your rig going Snorider?
I haven't heard from ya in a while.
You been doing much riding?
Pressure tested cooling system, found weep hole weeping. So then clamped off hose before and after water pump to verify I had no other coolent internal leaks ,seem to hold pressure very well . I...
When I built the motor I used the good head bolts from James. I didn't skemp on anything. I'm kinda hoping it's just the water pump that way I would still feel the 804 is still reliable! If it's...
Well I'm going to try to change the water pump first. And hoping that fixed the issue.
Let's keep our fingers crossed.
Have you ever seen a big bore cylinder crack and Leak? If so where does it...
Yes lol
Thanks James
Could a bad base gasket allow oil in the crank case?
What's the easy way to determine where the coolant in the sump oil is coming from? Head gasket or water pump seal? Do You guys have any good tech tips?
Thank!
What's a good way to determine which one it is?
Well I spoke too soon. Just headed down to grab some firewood and noticed fan was on but temperature gage was only reading 120. Then in overheat light. Check the coolant was very low found it all in...
Power steering is worth the money !!
It's awesome!!
So how is the stage 3 compared to the stage 2?
Big improvement?
Is there and power lost down low??
What did you end up finding wrong when...
Snowrider have you got your rhino issues all straightened out? I have been out of the loop for a while just getting back on the forum . Have you done any more mods ?
I noticed a huge difference when I put on my Yoshi's .
It's a very nice exhaust
I actually use blue lock tight (medium) on those nuts and never had a problem with getting them off. But I do not like things coming apart on a ride either. As long as you get proper torque you...
Good luck you'll get it!!
And it will be a beast!!
It took me some time to get mine dialed in and now it's a fun machine!!
To get a good fuell map takes quite a bit of time / tuning and you will have to apply it each time similar to the Bazza control In that regard. You could be running very lean making lots of heat...
Off the top of my head the secondary nut is big :-) LOL
I think it is 45 mm or 1 13/16"should work. That is off the top of my head so might want to doublecheck. But you should most definitely...
Depending on year the rivits coming loose in secondary???
Did you use red lock tight on nut ?
So that model says it has ignition. So you might want to look into what is program into that little magic box :)
Do you have a good fuel map in it?
Who did the programming?
If this is the unit in the picture u have s? It says it has timing? Do you get it from James may be he could get you a timing map? I use a bazzaz and BRP ingtion with mine, so I'm not super familiar...