Hello,
how is your ground wire comming off of the battery ? on my 05 660 i grounded the motor to the frame and the little 12 gauge ground wire from the battery i grounded it to frame right above the...
Type: Posts; User: TS2
Hello,
how is your ground wire comming off of the battery ? on my 05 660 i grounded the motor to the frame and the little 12 gauge ground wire from the battery i grounded it to frame right above the...
on mine 05 ,, the fan would kick on but only for a minute or so then back off , and it would run through this cycle , now when my motor reaches 180 my fan comes on and runs , and keeps my motor in...
Hello
I did this mod yesterday on my 05 660 .. i run full gauges and before in low 90"s my 660 would run around 195 to 205 on the temp gauge , the way i would get it to come back down to 180 is...
this is another mod that i just finished ,, i wanted to upgrade the air filter to a K&N filter so i went on Ebay
one listed for $107.00 and a stock replacement K&N was 67.00 so i would just do my...
Hey folks :
after doing my GM alternator install i have a 2 inches between the exhaust and the alternator so i ordered some
Titanium Lava Header Manifold Exhaust Heat Wrap Tape off of Ebay ,, i...
Timmi :
that is just gifs ,, its away I can post several pictures while not using a lot pf MB's
when posting pics . I use a program called PhotoScape been using it for several years
it's free...
Hello,
yes that's the factory handle , I just used a 1 od pipe about 6 inch long as it slides into the factory
grab handle tube , the rubber grip I cut the top off put it on flush then ran a...
will post a update on each mod when I get some free time .
Jake
https://i.imgur.com/Am2TLut.gif
https://i.imgur.com/YFB8VKu.gif
Have a Brand new Ricks HO Stator that is NIB
was sent to me for a replacement , but I went with a new
Yamaha OEM stator on my 05 660 Rhino .
Price is $ 155.00 shipped anywhere
in the lower 48...
my plans are to install a alternator so I thought I could go cheap on a stator so first one a 50.00 setup on Ebay ,
wires were to short ,, second another Ebay purchase Ricks HO stator $158.00...
nope that was $476.00 spent on 3# stators ..
Hey !!
well yes after $476.00 spent it's going . will make a new thread with details
of the adventure ..
Jake
well seems like I just cant get a break on this Damn thing ,, changed out the starter gear and a Ricky's HO stator
now it turns over but no fire to start .. any idea's on this turd ,, before stated...
Hello,
thanks for the reply ,, the stator is fried ,, will replace since then the starter gear has gone out aswell
now .. went to go start it and it just went Weeeeeee, pulled the starter and it...
Hello,
here is the LED upgrade that I did to the 660 Rhino today , it took about 1.5 hr to
do both lights , and that's taking your time on the cutting and smoothing out the bottom
of the housing...
after doing 3 mock ups , I settled on the simplest both in layout
and fab work ,, still have to do some smoothing up on the edges
and taking a 1/4 out of the width . but the guards should protect...
this week project will be fab up some tail light guards ,
will post back with pics when completed and installed .
TS2
https://i.imgur.com/rUMpp4A.jpg
ive been watching several Rhino videos on you tube , why does there seem to be a lot of 05-06 Rhinos with the older
style dash ?? mine is a 05 and I have the digital dash ..
interesting ???
...
Hello,
as part of my Rhino upgrades was to install a toggle swith panel ,, I like to keep my project nice and neat
and I didn't want several toggle switch holes through out the dash area , I went...
hello,
have to replace the stator on my 05 660
should I go the cheap ebay stator for 50.00
or the 150-160.00 one Ricky's on ebay
future plans is doing a auto alternator
install in the...
Hello,
have the tires on , with the lift kit & 27 " tires I gained almost 4 inches of under belly clearance ,
not using the 2 " spacers at this time , will get a plan on wheel studs that will work...
Hello,
Thanks for the reply ,, what ive been able to learn is
the stock rhino wheel stud is 10mm X 1.50 stud
in which I cant find a longer one anywhere , Ive read
where racer's went up to a...
Hello,
anyone knows where I can purchase some 2 inch wheel studs for my 05 660 ,
I went with 2 inch spacers on all corners and I don't like the amount of threads
through the lug nuts , about...
Hello,
Thanks for the replies ,, I went with the 9X27X14 on the front and 11X27X14 tires on the back ,, should be deliverd by tracking on Monday ,, put on a 2 " lift kit while waiting on the tires...
Hey that's a good place , I thought about the dash area , but 3/4 of my rifles are heavy bull barrels LRP's that weigh from 14 to 22 lbs
and I didn't want to take a chance on them popping out of...