How many cc's can you build a 660 with a stroker crank and 686 big bore kit what crank to buy
Sent from my iPhone using Tapatalk
Sponsored By: |
How many cc's can you build a 660 with a stroker crank and 686 big bore kit what crank to buy
Sent from my iPhone using Tapatalk
720..+4 stroker
James Davis
If you have questions call me!!!
304-673-2602
304-877-3419
Check out our web https://jbsperformance.com/
Email to - jbsperformanceinc@aol.com
Ship to - 131 Davis Ct., Mt. Hope, WV 25880
And there you go.
Commander 1000
Kawasaki Prairie 400
Suzuki Ozark 250
Suzuki 230
F-250 6.0 Diesel
What crank you got for me James
Sent from my iPhone using Tapatalk
I got a +4 welded and balanced w/CP 102mm piston/bore from James, and also installed a raptor stage one cam. I only have about 5 hours on the motor, but so far I'm very happy with it. Very noticeable gain in power, even with stock exhaust (did grind out stock header restriction). But even better, it runs SMOOTH, noticeably less vibration than stock. I also went with a 10:1 piston rather 11:1, for added reliability and because I lack a programmable ignition to pull timing out for added compression. Very happy with the setup
2007 Rhino 660 Special Edition
+4mm Hotrods stroker crank,welded/balanced, CP 10:1 102mm piston, Head studs, Raptor valve springs,Hotcam-Raptor stage one, Stock exhaust with header welds ground out, and billet tip on muffler, black rhino cdi, dragonfire sheave, stock rollers/spring
Jetting-165 main, 50 pilot (2 turns out), swapped washers on needle
Bookmarks