-
Sloppy steering
So my 700 has a long arm kit and I noticed the steering has been getting bad lately, I thought it was a loose tie rod where it connects to the steering rack but it looks like the rack and pinion has a lot of play in it. Is there any adjustment or do I need to replace it.
Thanks
Sent from my VS986 using Tapatalk
09 700 with a 727 big bore cp 10.75:1 , ported and polished head, throttle body, stage 3 cam, +1valves, msd cdi, alba exhaust, JBS sheave kit with 17g weights, gold spring, fabtech long arm, gorilla axles, four seater cage, seats 4 point harnesses, led lights, full skid plates, 27" ITPs on beadlocks, power steering, aluminum radiator, 4500 lb winch w/synthetic rope, aluminum bed. water and oil temp and oil pressure gauges, half windshield, light bar. now has a slug kit and a bigger injector
-
Administrator
the bolt in the u joint is usually loose too..top and bottom which causes slack
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
What Hot Rod said; If the collars are loose on the rack or power steering unit it will jump the splines when the steering is in a bind, depending on how loose it might be. Is it a stock rack and pinion?
06/450: Rhino;
JBS Hot Rod Sheave/12gr OD's; Blue Spring; 04 Style/KN Air; Dyna CDI; Axia Exhaust Tip; 3" Lift; Sport Shocks; 27X14 Mudlite XTR's; Warn 2500#
08/700: Rhino;
JBS Hot Rod X-Sheave/16gr OD's/Slugged; Purple Spring; Alba TB; Raptor HotCam; MSD/JBS-Map; Yoshimura Duals; Pro One Doors; LSR MTS; LSR Front & Back Supports; Ricochet Skids; Elka 4's; RackZilla/PS: 26X12 Pitbull Growlers; Camoplast T4S; Viper 4500#;
Trail Bright LEDs.
Let'em Buck!!!
-
It is stock
Sent from my VS986 using Tapatalk
09 700 with a 727 big bore cp 10.75:1 , ported and polished head, throttle body, stage 3 cam, +1valves, msd cdi, alba exhaust, JBS sheave kit with 17g weights, gold spring, fabtech long arm, gorilla axles, four seater cage, seats 4 point harnesses, led lights, full skid plates, 27" ITPs on beadlocks, power steering, aluminum radiator, 4500 lb winch w/synthetic rope, aluminum bed. water and oil temp and oil pressure gauges, half windshield, light bar. now has a slug kit and a bigger injector
-
IIRC There is some adjustment and a little rebuild kit or a couple parts that will help the slop if the main rack or pinion is not worn. Check the manual and maybe a video you can find.
2016 Wolverine R-Spec EPS, Camo, fender ext. 4000 Moto winch w/syn rope, 14"Method B-locks, 27" Maxxis Vipr 9 & 11's, Full flip windshield, A-arm guards, 2 batts, JBS CVT grind, 16 OD, slugs, purple, JBS/Eibach springs, Autometer Temp Gauge
08 Rhino 700 SE Black Armor, JBS 734 (bbk w/Carillo crank & rod, CP 11:1, deshrouded valves, Raptor springs, Viking cam & FI, MSD, afr Gauge, Unleashed sheave w/JBS OD 18g greased, Purple, slugs, 27" Mudlite XTRs , 6" Chopped , Mishi Rad, ALBA exhaust
-
Thanks will do, I found a complete rack in Amazon for 120. But not sure how good it is
Sent from my VS986 using Tapatalk
09 700 with a 727 big bore cp 10.75:1 , ported and polished head, throttle body, stage 3 cam, +1valves, msd cdi, alba exhaust, JBS sheave kit with 17g weights, gold spring, fabtech long arm, gorilla axles, four seater cage, seats 4 point harnesses, led lights, full skid plates, 27" ITPs on beadlocks, power steering, aluminum radiator, 4500 lb winch w/synthetic rope, aluminum bed. water and oil temp and oil pressure gauges, half windshield, light bar. now has a slug kit and a bigger injector
-
Originally Posted by
reaper999
Thanks will do, I found a complete rack in Amazon for 120. But not sure how good it is
Sent from my VS986 using Tapatalk
Finally got around to looking into this and the housing is broke
Sent from my VS986 using Tapatalk
09 700 with a 727 big bore cp 10.75:1 , ported and polished head, throttle body, stage 3 cam, +1valves, msd cdi, alba exhaust, JBS sheave kit with 17g weights, gold spring, fabtech long arm, gorilla axles, four seater cage, seats 4 point harnesses, led lights, full skid plates, 27" ITPs on beadlocks, power steering, aluminum radiator, 4500 lb winch w/synthetic rope, aluminum bed. water and oil temp and oil pressure gauges, half windshield, light bar. now has a slug kit and a bigger injector
-
U got a pic, im dealing with same thing on wifes rzrS. Gonna align it tomarrow and go over everything
Sent from my iPhone using Tapatalk
09 700 sport
aftermarket cam, duel muzzy exhaust, alba custom map, MSD fuel controller, alba water temp and oil press gauges, SDR LT6, SDR 4seat custom cage and bed, rigid industries 40in. and 10in. light bars, led head and taillights, fox remote resi shocks, DWT beadlock wheels, twisted stitch seats front and back, crow 4pt harness front and back, super atv power steering, quick release steering wheel. ruggid radios incar communication and car to car com, JBS EXTREME2 sheave on the way
-
I'll get one tomorrow,
Sent from my VS986 using Tapatalk
09 700 with a 727 big bore cp 10.75:1 , ported and polished head, throttle body, stage 3 cam, +1valves, msd cdi, alba exhaust, JBS sheave kit with 17g weights, gold spring, fabtech long arm, gorilla axles, four seater cage, seats 4 point harnesses, led lights, full skid plates, 27" ITPs on beadlocks, power steering, aluminum radiator, 4500 lb winch w/synthetic rope, aluminum bed. water and oil temp and oil pressure gauges, half windshield, light bar. now has a slug kit and a bigger injector
-
Originally Posted by
reaper999
I'll get one tomorrow,
Sent from my VS986 using Tapatalk
Thank you
Sent from my iPhone using Tapatalk
09 700 sport
aftermarket cam, duel muzzy exhaust, alba custom map, MSD fuel controller, alba water temp and oil press gauges, SDR LT6, SDR 4seat custom cage and bed, rigid industries 40in. and 10in. light bars, led head and taillights, fox remote resi shocks, DWT beadlock wheels, twisted stitch seats front and back, crow 4pt harness front and back, super atv power steering, quick release steering wheel. ruggid radios incar communication and car to car com, JBS EXTREME2 sheave on the way
Bookmarks