-
Keyed 12v on an 07 rhino
So I installed a new winch on my rhino the other night I got it all wired up like the instruction says too .the only thing I'd really need help with is finding a keyed 12v spot on the rhino it's self there's one wire that they said should only have 12v to it when the key is on also the rocker switch have for the winch needs 12v to power it could I also put it on the same 12v keyed wire any help would be great
Thanks
-
peter pan
I don't own a 07 should not be hard to find though. no you need to go to the battery to power it
-
Administrator
Go to the fuse panel with a test light and turn the key on and find power on with key and add it there
Sent from my Moto G Play using Tapatalk
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
-
i could be wrong but i thought it was a pink wire off the key switch
07 camo 660,yoshi duals,kms intake,dynatec cdi,jet kit, montana jack f&r winch mount,w/ warn xt40, 27" bighorns,2" lift, cab with summit heater,aux red top optima, 5 bad ass jrt's on board,itp ss 212s, jbs sheave,14 gr. wts,orange spring, 40 " led light bar, autometer guages,equus tach,innovate afm, jensen ms30 ,jbl 6.5s, elka stage 1 shocks, kenwood 2way radio, alpine ktp445u amp, led headlight mod,twisted stitch harnesses,pro1 doors, 60 amp alternator,power steering, pc925 battery
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Okay ill have to check it today after work
-
Originally Posted by
mpdave391
Okay ill have to check it today after work
The 12v port In the dash is keyed and is easy to get to.
O5 660 stock motor , jbs sheave with 14g greased greaseless, orange secondary spring with anti friction washers, dynatec Cdi, tyrex shocks, glo shift guages, baxter built rear diff fix, 30" Zillas on 14" sti bead locks, aluminum framed safety glass windshield, aluminum flatbed with dog box, cooler, and water tank. Built what I could and bought the rest. To be continued......
Bookmarks