What's up fellas, I'm new here and figured I would share my ride.
2017 Grizzly 700
Warn ProVantage 2500 lb. Winch with synthetic line with KFI winch cable stopper.
HighLifter lift kit.
MSA Diesel Wheels 14x7 wrapped in MotoSport Moto MTC 28x10-14 tires.
I also upgraded the factory handle bar light from halogen to LED to match the factory LED headlights.
Ordering some clutch goodies today to hopefully make up the power loss from the bigger tires!
I like the white, I never liked it before getting my white wolvy.
" White Shadow " Wolverine X2
JBS Performance Extreme Sheave
JBS Performance Suspension Springs
Team Alba Racing ECU
Rigid Side Shooter Led
Yamaha Cab Enclosure
Bazooka Party Bar
James has all those items, and the best prices. You can install the clutch yourself if you have the tools.
Originally Posted by mdomicolo
I got my clutch kit, just need to find someone here in North Jersey to install it, lol.
Its that time, I need an exhaust, tuner, intake? and would like to delete the AIS.. can any one point me in the right direction?!?!
" White Shadow " Wolverine X2
JBS Performance Extreme Sheave
JBS Performance Suspension Springs
Team Alba Racing ECU
Rigid Side Shooter Led
Yamaha Cab Enclosure
Bazooka Party Bar
06 Rhino 686 s/e blue, 11:1 piston, stage 1 hot cam, raptor springs, JBS sheave and clutching, cmf 2" lift, alum air box, exhaust tip, dial a jet, j strong roof, ride on dust shield, power steering, Stage 5 Elka's riding on 28" 11 14 mega mayhems all around on sti hd3 wheels, hp cooling fan, 3500# winch, 32" led light bar and stuff!
Nice ride. I got a 2017 Kodiak and put the Yamaha front brush guard on it. Then put 27 inch Kenda Bear claws on it. Dont think too much bigger will fit with the front bumper
That's a nice looking grizzly. I sure do miss my 07. I would love to have one with everything that's been done to my Rhino.
You will love the clutch. If you do the exhaust and fuel controller, throw a cam in there to go with it. All of that would be a real nice gain on a grizzly. You got your priorities straight by doing the clutch 1st. That's where it all starts.
JBS 734 with Crank Works crank and rod - CP 11:1 BBK- Hotcams stage 3 Raptor cam - JBS ported head - JBS Hot Rod sheave with 16s - Gold secondary - 26x9 OG Bighorns on Racline wheels - BRP cdi - Bazzaz Z FI - Yoshimura exhaust - Hump's led headlight swap with Trailbrightled lights - 10" Rigid SR light bar - 4" cage chop with home made custom bracing - home built doors - Mishimoto radiator
Bookmarks