-
EXhaust Temperture??
Curious what the Temperture of the Exhaust Head pipe is/rest of exhaust? Im adding a AFR gauge, and welding in a O2 Bung, and plan on having the entire exhaust Powder coated. I did the tip mod, and the paint I used on there burned right off, not surprised... the powder coat guy has a high temp powder rated for 1200 degrees, or he says he can do a ceramic coating that's good to 2000 degrees? Looking for someone that's taken a temp gauge to a running machines exhaust. Thanks!!!
2017 Yamaha Wolverine R-Spec SE
-LED Headight bulbs, LED Fog Lights
-SuperATV Half windshield, Smoked
-Exhaust Tip Mod
-K&N Air filter
-AIS Blocked off
-JBS Clutching, all the good stuff
-JBS Radiator Gaurds
-Alba Reflashed ECM
-Bazooka Party Bar, with 10" Bazooka Amplified Marine Sub in Bed
-EMP rear bumper
-Doors
More to come...
-
Ridin' and Guidin'
the wolverine runs a bit lean on fuel, emissions standard crap. need a programmer to add fuel
" White Shadow " Wolverine X2
JBS Performance Extreme Sheave
JBS Performance Suspension Springs
Team Alba Racing ECU
Rigid Side Shooter Led
Yamaha Cab Enclosure
Bazooka Party Bar
-
Originally Posted by
Timmi
the wolverine runs a bit lean on fuel, emissions standard crap. need a programmer to add fuel
I'm aware of that Timmi. I had my ECU reflashed, and I blocked off the AIS. just haven't run it since doing this stuff, installing a JBS sheave,weights, and spring also. Lots of work for me to do in the upcoming month. Also gauges, led running lights, and a sound bar, and doors.
Sent from my Moto G (4) using Tapatalk
2017 Yamaha Wolverine R-Spec SE
-LED Headight bulbs, LED Fog Lights
-SuperATV Half windshield, Smoked
-Exhaust Tip Mod
-K&N Air filter
-AIS Blocked off
-JBS Clutching, all the good stuff
-JBS Radiator Gaurds
-Alba Reflashed ECM
-Bazooka Party Bar, with 10" Bazooka Amplified Marine Sub in Bed
-EMP rear bumper
-Doors
More to come...
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Ridin' and Guidin'
ok that helps a lot, especially with the open tip. does your exhaust still glow at all?
Originally Posted by
Yedi
I'm aware of that Timmi. I had my ECU reflashed, and I blocked off the AIS. just haven't run it since doing this stuff, installing a JBS sheave,weights, and spring also. Lots of work for me to do in the upcoming month. Also gauges, led running lights, and a sound bar, and doors.
Sent from my Moto G (4) using Tapatalk
" White Shadow " Wolverine X2
JBS Performance Extreme Sheave
JBS Performance Suspension Springs
Team Alba Racing ECU
Rigid Side Shooter Led
Yamaha Cab Enclosure
Bazooka Party Bar
-
Originally Posted by
Timmi
ok that helps a lot, especially with the open tip. does your exhaust still glow at all?
Never rode at night to notice it, when I did the tip I could tell it was a little lean, had some minor popping and slight hesitation vs stock. I'm sure it's going to run cooler with all the mods done vs stock.
Sent from my Moto G (4) using Tapatalk
2017 Yamaha Wolverine R-Spec SE
-LED Headight bulbs, LED Fog Lights
-SuperATV Half windshield, Smoked
-Exhaust Tip Mod
-K&N Air filter
-AIS Blocked off
-JBS Clutching, all the good stuff
-JBS Radiator Gaurds
-Alba Reflashed ECM
-Bazooka Party Bar, with 10" Bazooka Amplified Marine Sub in Bed
-EMP rear bumper
-Doors
More to come...
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
Bookmarks