Would it be wise to pull the cam plate off to check the rollers if a belt breaks?
Sponsored By: |
Would it be wise to pull the cam plate off to check the rollers if a belt breaks?
2018 Blue Wolverine X4
JBS Sheave
JBS Springs
Alba Tune
One of the things I did when I installed my sheave was to replace the cam bolts with Allen heads. Phillip head bolts is one thing that drives me nuts. It will make taking the cam plate off much easier in my opinion.
2018 Blue Wolverine X4
JBS Sheave
JBS Springs
Alba Tune
As long as they don't hit the cage
Sent from JBS test site
James Davis
If you have questions call me!!!
304-673-2602
304-877-3419
Check out our web https://jbsperformance.com/
Email to - jbsperformanceinc@aol.com
Ship to - 131 Davis Ct., Mt. Hope, WV 25880
You would have to have a major problem to need a belt change on the trail..I don't carry a extra..
Sent from JBS test site
James Davis
If you have questions call me!!!
304-673-2602
304-877-3419
Check out our web https://jbsperformance.com/
Email to - jbsperformanceinc@aol.com
Ship to - 131 Davis Ct., Mt. Hope, WV 25880
James Davis
If you have questions call me!!!
304-673-2602
304-877-3419
Check out our web https://jbsperformance.com/
Email to - jbsperformanceinc@aol.com
Ship to - 131 Davis Ct., Mt. Hope, WV 25880
Clutching did good! Very low in low. I did swamp the belt box so have to tear everything apart again. Sucks. I guess I need to get this thing snorkeled soon.
Sent from my SM-G900V using Tapatalk
Clutching did good! Very low in low. I did swamp the belt box so have to tear everything apart again. Sucks. I guess I need to get this thing snorkeled soon.
Springs were great. I think the shocks topped out alot. Idk. But was taller and smoother so am happy.
Sent from my SM-G900V using Tapatalk
Bookmarks