So I've ordered the 686 kit from James and excited to get to it. I've already upgraded my middle drive gear . Any tips or advice on installation ?
Sponsored By: |
So I've ordered the 686 kit from James and excited to get to it. I've already upgraded my middle drive gear . Any tips or advice on installation ?
06-660 JBS sheave 14g OD's
Make sure the ring gap is right
Sent from my Moto E (4) Plus using Tapatalk
James Davis
If you have questions call me!!!
304-673-2602
304-877-3419
Check out our web https://jbsperformance.com/
Email to - jbsperformanceinc@aol.com
Ship to - 131 Davis Ct., Mt. Hope, WV 25880
And watch the vid for where to use yamabond
Sent from my Moto E (4) Plus using Tapatalk
James Davis
If you have questions call me!!!
304-673-2602
304-877-3419
Check out our web https://jbsperformance.com/
Email to - jbsperformanceinc@aol.com
Ship to - 131 Davis Ct., Mt. Hope, WV 25880
Saw your video on the yamabond James and wondering whether or not it should be put on the whole gasket for just at the points you show. The service manual says the whole gasket but maybe that's overkill
06-660 JBS sheave 14g OD's
Overkill! You dont want gasket to be able to slide or move when tightening.
06 Rhino 686 s/e blue, 11:1 piston, stage 1 hot cam, raptor springs, JBS sheave and clutching, cmf 2" lift, alum air box, exhaust tip, dial a jet, j strong roof, ride on dust shield, power steering, Stage 5 Elka's riding on 28" 11 14 mega mayhems all around on sti hd3 wheels, hp cooling fan, 3500# winch, 32" led light bar and stuff!
So all went well with my 686 kit from James! New cylinder, new CP piston, rings and wrist pin, raptor valves and springs. Took the machine out for a good ride this weekend and I am happy to get my performance back! It has quite a bit more pull up hills and bottom end torque. Thank you James and Nikki for all your help in answering my questions and supplying me with all parts needed! Another happy JBS customer !!
06-660 JBS sheave 14g OD's
Bookmarks