New X2 Rspec owner in Michigan

**Timmi** · 07-20-2018, 06:23 AM

this is from a video I did. there are four clamps on each of the two cross bars

**Piston Yamaha** · 07-20-2018, 06:44 AM

Originally Posted by Timmi

it did but my bike is at James house. there are two crossbars on the cage, how is the roof sagging?

It dips down in the center where the brackets that extend from the crossbar to the front of the roof. When I removed the screws, the roof popped up an inch or so. I thought a spacer may be missing from the end of that bracket. You can see the sag in this pic, it's right in the middle front. I thought that's how the roof was shaped... until I started to install a windshield.

Click image for larger version.

Name: DSCN8223.jpg
Views: 137
Size: 91.0 KB
ID: 13173

Click image for larger version.

Name: Capture.JPG
Views: 117
Size: 45.8 KB
ID: 13174

**Timmi** · 07-20-2018, 07:16 AM

yea it should be straight across the front, yours is misformed

Originally Posted by Piston Yamaha

It dips down in the center where the brackets that extend from the crossbar to the front of the roof. When I removed the screws, the roof popped up an inch or so. I thought a spacer may be missing from the end of that bracket. You can see the sag in this pic, it's right in the middle front. I thought that's how the roof was shaped... until I started to install a windshield.

**Piston Yamaha** · 07-20-2018, 11:28 AM

Originally Posted by Timmi

yea it should be straight across the front, yours is misformed

I got the roof figured out. The crossbar was on upside down and the brackets were on upside down. Or possibly, it was just the brackets but I had already flipped the bar around. Either way, it's nice and straight now.