Thanks Thanks:  0
Likes Likes:  0
Results 1 to 3 of 3
  1. #1
    TS2's Avatar
    Join Date
    Dec 2019
    Location
    Missouri
    Posts
    32

    made a back bumper for the 660

    I bought my rhino back in mid Nov of this year , and have plans to do several mods ,
    first one was a cargo carrier for deer hunting , the second was bed rails to protect the
    bed and my current one was a back tube bumper .

    here is the specs :

    4x4 angle 13 inches long , cut and trimmed
    Bumper templet made out of ¼ inch plate steel
    Bumper tubes 1 7/8 OD
    Top tube length 47”
    Bottom 37 ½ “

    Used 3/8 carrage bolts to drill through the bed and mount
    The bumper mount to bed .

    Bumper mount used 3/8 grade 8 bolts to mount bumper
    To bumper mount on the bed . 4x4 angle 13 inches long , cut and trimmed
    Bumper templet made out of ¼ inch plate steel
    Bumper tubes 1 7/8 OD
    Top tube length 47”
    Bottom 37 ½ “

    Used 3/8 carrage bolts to drill through the bed and mount
    The bumper mount to bed .

    Bumper mount used 3/8 grade 8 bolts to mount bumper
    To bumper mount on the bed .

    as I didn't want to weld it all up as a single unit , incase I ever wanted just to
    remove the bumper .

    on the dump bed it tilts over about 80% and the bottom tube sets on the
    2 inch ball on the receiver .

    TS2

    [IMG]

    [IMG]

    [IMG]

    [IMG]

    [IMG]
    We the unwilling , led by the unknowing
    are doing the impossible , for the ungrateful
    we have done so much with so little for so long
    that we are qualified to do anything with nothing..

    https://www.youtube.com/watch?v=iJZYG5qwHHI

  2. #2
    Ridin' and Guidin' Timmi's Avatar
    Join Date
    Feb 2014
    Posts
    10,102
    looks solid, you did a good job making it

    "
    White Shadow " Wolverine X2
    JBS Performance Extreme Sheave
    JBS Performance Suspension Springs
    Team Alba Racing ECU
    Rigid Side Shooter Led
    Yamaha Cab Enclosure
    Bazooka Party Bar

  3. #3
    rodneygt's Avatar
    Join Date
    Nov 2014
    Location
    Summit, MS
    Posts
    1,131
    Nice work!
    2011 Commander XT 1000

    2006 660 Special Edition (Sold)
    Had lots of neat stuff...

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •