-
660 Air Filter Mod
this is another mod that i just finished ,, i wanted to upgrade the air filter to a K&N filter so i went on Ebay
one listed for $107.00 and a stock replacement K&N was 67.00 so i would just do my own air filter mod
so i found this one that i thought would do the job for 17.99
so what i used to make it happen was a exhaust fitting a 2.5 to 3" i bought it at Oreilly Auto parts for $3.56 sofor $21.55 I up graded the air filter . I used a 4 inch cut off wheel to cut the adapter , i had 5/8 inch on both sides and it works great , you have two options you can run the filter with out the air box if you choose , or inside the factory air box , on the air box you do have to trim the tabs inside about 1/2 for clearance, the filter fits in the air box and bolts up nice and tight ..
Jake
https://www.ebay.com/itm/Tall-Blue-3...72.m2749.l2649


We the unwilling , led by the unknowing
are doing the impossible , for the ungrateful
we have done so much with so little for so long
that we are qualified to do anything with nothing..
https://www.youtube.com/watch?v=iJZYG5qwHHI
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Ridin' and Guidin'
Looks good! I prefer oiled foam filters but whatever works!
" White Shadow " Wolverine X2
JBS Performance Extreme Sheave
JBS Performance Suspension Springs
Team Alba Racing ECU
Rigid Side Shooter Led
Yamaha Cab Enclosure
Bazooka Party Bar
-
Post Thanks / Like - 0 Thanks, 1 Likes
Bookmarks